New York, NY1
Before we start, I’ve kept VLAN10 at 10.1.1.2/24. The default gateway and setting and everything else is the same as previous section. Telnet Running on TCP port 23, Telnet is an excellent way to logically hop around a network rather than physically hopping around a network. Even if all the devices you are working with […]
Introducing To SVI While our L2 switches don’t perform routing (they just switch and that’s all they do), we still need an IP address (a L3 address) on that switch in order to remotely connect to said switch.( we want to configure it without actually having to go to the switch , connect to the […]
Introduction to Routing We’ll start our walkthrough with a basic network and follow the decision-making process from the point of view of the host, then router. We’ll start with this iconfig output from our host PC. When a host sends a packet, there are two possibilities regarding the destination host. It’s on the same subnet […]
